
Cross Member Body RepairFront Cross Member * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Rear Cross Member * These dimensions indicated in this figure are actual-measurement dimensions...
FenderComponents and Components Location Component Location 1. Fender assembly Repair procedures Replacement • Be careful not to damage the fender and body...
Removal • In order to remove the front glass, use the tools shown in the following figure: [Tooling Diagram] Square wire Insert-type wire grip [Tooling Assembly Diagram] • Insert and affix square wire into the insert hole of the wire grip ...
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Disconnect the ASCC ECU connector (A). 3. Remove the ASCC ECU (C) after remove the installation nut (B). Installation 1. Install in the reverse order of removal...