Hyundai Sonata LF: Intake And Exhaust System / Air Cleaner Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Mechanical System / Intake And Exhaust System / Air Cleaner Repair procedures

Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
DIsconnect the air duct (A).

4.
Remove the air duct and air cleaner assembly.

Tightening torque
Hose clamp bolt:
2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)
Air cleaner assembly bolts:
7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

(1)
Disconnect the breather hose (A), RCV hose (B), booster vacuum hose (C) and air intake hose (D).
(2)
Remove the air cleaner assembly (E).

5.
Install in the reverse order of removal.
Air Cleaner Element
1.
Open the service cover (A)

2.
Replace the air cleaner element (A) with a new one.

    Air Cleaner Components and Components Location

    C..

    Intake Manifold Components and Components Location

    C..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Front Stabilizer Bar Repair procedures


    Inspection 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap (A).     Be careful not to damage to the wheel cap (A) when removing the it. 3. Remove the front wheel and tire (A) from front hub...

    Hyundai Sonata LF 2014-2019 Service Manual: Electric WGT Control Actuator Description and Operation


    Desrcription The Electric WGT Control Actuator is installed on the turbocharger.It operates the vain in the Waste Gate Turbocharger (WGT) and regulates the compressed air amount by the ECM's PWM signal. This actuator consists of a DC motor which actuates the vane, a 2-step gear which increases torque of the DC motor, a position sensor which detects status of the vane, an electric control unit which drives the DC motor...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org