Hyundai Sonata LF: Intake And Exhaust System / Air Cleaner Components and Components Location

Intake And Exhaust System

..

Air Cleaner Repair procedures

Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. DIsconnect the air duct (A). 4. Remove the air duct and air cleaner assembly...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Troubleshooting

Troubleshooting SymptomPossible causeRemedyHard steeringImproper front wheel alignmentExcessive turning resistance of lower arm ball jointLow tire pressureNo power assistCorrectReplaceAdjustRepair or replacePoor return of steering wheel to centerImproper front wheel alignmentCorrectPoor or rough rideImproper front wheel alignmentMalfunctioning shock absorberBroken or worn stabilizerBroken or worn coil springWorn lower arm bushingCorrectRepair or replaceReplaceReplaceReplace the lower arm assemblyAbnormal tire wearImproper front wheel alignmentImproper tire pressureMalfunctioning shock absorberCorrectAdjustRepair or replaceWanderingImproper front wheel alignmentPoor turning resistance of lower arm ball jointLoose or worn lower arm bushingCorrectReplaceRetighten or replaceVehicle pulls to one sideImproper front wheel alignmentExcessive turning resistance of lower arm ball jointBroken or worn coil springBent lower armCorrectReplaceReplaceRepair or replaceSteering wheel shimmyImproper front wheel alignmentPoor turning resistance of lower arm ball jointBroken or worn stabilizerWorn lower arm bushingMalfunctioning shock absorberBroken or worn coil springCorrectReplaceReplaceReplaceRepair or replaceReplaceBottomingBroken or worn coil springMalfunctioning shock absorberReplaceRepair or replace Wheel /tire noise, vibration and harshness concerns are directly related to vehicle speed and are not generally affected by acceleration, coasting or decelerating...

Hyundai Sonata LF 2014-2019 Service Manual: Intake Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the intake actuator operates to the recirculation position when connected in reverse...