| Specification |
| Item | Specification |
| Ultrasonic sensor | Voltage rating | DC 12V |
| Detecting range | 40 cm ~ 120 cm |
| Operation voltage | DC 9 ~ 16V |
| Operation current | MAX 300mA |
| Operation temperature | -30°C ~ +80°C (-22°C ~ +176°C) |
| Operation frequency | 48 ± 5KHz |
| Number of sensors | 4EA (Left side, Left center, Right center, Right side) |
Components and Components LocationComponent Location 1. BCM (Body Control Module)2. Ultrasonic sensor Rear parking assist control unit function is built in BCM (body control unit)...
Troubleshooting Trouble symptomProbable causeRemedyDisplayed the warning lamp "E"(Driving is only possible with 1/ R gear)Not performed DCT learningPerform the DCT manual learning procedure.Impossible to driving with odd gearClutch actuator (Clutch motor 1 or position sensor 1 failure)Replace the clutch actuator assembly...
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart Key Code Saving". 3. After selecting "Smart Key Teaching" menu, push "ENTER" key, then the screen will be shown as below...