Hyundai Sonata: Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.
Remove the oil lever gauge (A).

Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

2.
Install in the reverse order of removal.
Oil Pan Repair procedures
Removal 1. Remove the under covers. 2. Drain engine oil. 3. Using the SST (09215-3C000) and remove the oil pan.     • Insert the SST between the oil pan and the lad ...

Oil Cooler Repair procedures
Removal 1. Loosen the drain plug and drain the coolant. Open the radiator cap to make rapid draining. (Refer to Cooling System - "Coolant") 2. Disconnect the oil cooler hose (A). 3. Remo ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Oil Pump Components and Components Location
Components 1.  Timing chain cover2.  Inner rotor3.  Outer rotor4.  Pump cover ...

Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures
Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; preferably wall mounted. The LDWS camera will have a "System Out of Calibration" DTC set if not op ...

© 2018-2025 www.hsonatalf.org