Hyundai Sonata LF: Dual Clutch Transmission Control System / Inhibitor Switch Specifications

Inhibitor Switch Description and Operation

Description • Components location : DCT (Dual Clutch Transmission) • Function - The inhibitor switch mounted on the upper of transaxle and connected with shifter lever...

Inhibitor Switch Schematic Diagrams

C..

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Fuel Pump Control Module (FPCM) Description and Operation

Description The fuel pump control module (FPCM) is installed on the right side of the fuel tank on the fuel pump top plate and controls the DC motor mounted inside the low pressure fuel pump. The module compares instantaneous fuel pressure information measured by the fuel pressure sensor (FPS) with target fuel pressure information provided by the ECM and generates the desired target fuel pressure by controlling the fuel pump motor and regulating fuel flow rate in the low pressure fuel line between the low and high pressure fuel pumps...

Hyundai Sonata LF 2014-2019 Service Manual: Steering Angle Sensor Repair procedures

Adjustment Calibration (Setting up the zero angle) Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be performed as following cases. - Replacement of the Steering Wheel Angle Speed Sensor - Replacement or repair of the Steering column - Detection of DTC codes (C1260, C1261) - Replacement of the sensor cluster - Replacement of HECU Calibration procedure Perform wheel alignment and stand the steering wheel in a line within ±5°error...