Hyundai Sonata LF: Starting System / Starter Description and Operation

Hyundai Sonata LF 2014-2019 Service Manual / Engine Electrical System / Starting System / Starter Description and Operation

Description
The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter armature when the engine starts, the clutch pinion gear overruns.
In conjunction with the ISG function, the starter motor must do a great deal more work. Therefore, the starter motor is configured for a significantly higher number of start cycles. The components of the starter motor have been adapted to the higher requirements.

1. Solenoid
2. Brush
3. Armature
4. Overrun clutch

    Troubleshooting

    T..

    Starter Specifications

    S..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Intake Manifold Repair procedures


    Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the engine wiring connector and haness clamp and disconnect the wiring from intake manifold. 4. Disconnect the PCV (Positive crankcase ventilation) hose (A) and the PCSV (Purge control solenoid valve) (B)...

    Hyundai Sonata LF 2014-2019 Service Manual: Fuel Pump Control Module (FPCM) Description and Operation


    Description The fuel pump control module (FPCM) is installed on the right side of the fuel tank on the fuel pump top plate and controls the DC motor mounted inside the low pressure fuel pump. The module compares instantaneous fuel pressure information measured by the fuel pressure sensor (FPS) with target fuel pressure information provided by the ECM and generates the desired target fuel pressure by controlling the fuel pump motor and regulating fuel flow rate in the low pressure fuel line between the low and high pressure fuel pumps...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org