| Replacement |
|
| 1. |
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim") |
| 2. |
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
[LH]
[RH]
|
| 3. |
After loosening the retractor (A) mounting bolt, remove the rear seat belt (B).
[LH]
[RH]
|
| 4. |
Install in the reverse order of removal.
|
Replacememt 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A). 3. Install in the reverse order of removal. • Replace any damaged clips...
Component Location 1. Blower unit assembly Components 1. Intake actuator2. Intake case [LH]3. Intake door assembly4. Air filter5. Filter cover assembly6. Intake inlet seal 7. Intake case [RH]8. Intake outlet seal 9. Blower upper cover10. Blower unit pad11...