Hyundai Sonata LF: Engine Control System / Rail Pressure Sensor (RPS) Specifications

Rail Pressure Sensor (RPS) Description and Operation

Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal...

Rail Pressure Sensor (RPS) Troubleshooting

S..

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Description and Operation

Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization phase and be turned off afterward...

Hyundai Sonata LF 2014-2019 Service Manual: Door Mood Lamp Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the door mood lamp connector. 4. Remove the door mood lamp (A). Installation 1. Install the door mood lamp and connector...