| Description |

Injector Repair proceduresInspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2...
Inspection [System Inspection] 1. Disconnect the vapor hose from the intake manifold and connect a vacuum pump to the nipple on the intake manifold. · At Cold Engine [Engine Coolant Temperature < 60°C(140°F)] EngineOperatingConditionAppliedVacuumResultIdleMin...
Description Steering Wheel Angle Sensor detects rotating direction of the vehicle. Rotating direction detected by the sensor is communicated with HECU as CAN signal involving information about the angle through CAN communication line. HECU detects speed of the steering wheel handling and the angle with this CAN signal...