| Removal and Installation |
| 1. |
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover") |
| 2. |
Remove the pump cover (A).
|
| 3. |
Remove the inner rotor (B) and outer rotor (C).
|
| 4. |
Install in the reverse order of removal. |
Oil Pressure Switch Repair proceduresRemoval and Installation 1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. 3. Remove the oil pressure switch (A)...
R..
Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4. 4. Check that the resistance is within the specification...