Hyundai Sonata LF: Heater / Mode Control Actuator Components and Components Location

Temperature Control Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7...

Mode Control Actuator Description and Operation

Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Special Service Tools

Special Service Tools Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09455-21200)Installation of the front oil sealValve stem oil seal installer(09222-2B100)Installation of the valve stem oil sealValve spring compressor and holderA : (09222-3K000)B : (09222-3K100)Removal and installation of the intake or exhaust valveCrankshaft rear oil seal installerA : (09231-H1100)B : (09231-2B200)Installation of the crankshaft rear oil sealRing gear stoppper(09231-2B100) (A)(09231-3N100) (B)Removal and installation of crankshaft pulley bolt...

Hyundai Sonata LF 2014-2019 Service Manual: Trunk Trim. Repair procedures

Repair procedures Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...