Hyundai Sonata LF: Hood / Hood Lift Repair procedures
| • |
When removing and installing the hood lift, an assistant is necessary. |
| • |
When removing the hood lift, first remove the lower portion and then upper portion. |
|
| 1. |
Using a screwdriver, lift the socket clips (A) up slightly on
both ends of the lift (B), and then remove the lift from the bracket. 
|
| 2. |
Push the socket of the lift into the bracket for installation.
| • |
Make sure the hood locks / unlocks and opens / closes properly. |
|
|
Replacement
•
Be careful not to damage the hood and body.
•
When removing and installing the hood, an assistant is necessary...
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator pad (A).
•
Be careful not to scratch the hood panel...
Other information:
Diagnosis With GDS
1.
The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).
? The diagnostic system (GDS) provides the following information.
(1) Self diagnosis: Checking the failure code (DTC) and display...
Removal and Installation
Cooling Fan Assembly
1.
Disconnect the battery terminals.
2.
Remove the under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
3.
Disconnect the air duct(A).
4.
Disconnect the coolingfan connector(A)...
Hood Assembly Repair procedures
Hood Insulator Pad Repair procedures