| Removal and Installation |
| 1. |
Crankshaft damper pulley.
(Refer to Timing System - "Damper Pulley") |
| 2. |
Remove the front oil seal.
|
| 3. |
Install in the reverse order of removal. |
S..
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel...