| Replacement |
| 1. |
Loosen the front door checker (B) mounting bolt. |
| 2. |
Detach the clips, then remove the front door side weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Front Door Belt Outside Weatherstrip Repair proceduresReplacement 1. Pull down front door window glass by pressing the power window glass switch. 2. Remove the front door belt outside weatherstrip (A)...
Front Door Latch Repair proceduresReplacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. To remove the front door outside handle base connector (A), widen both sides of the lock pins in the direction of the arrow and then push back the front door outside handle base connector...
Description Body Control Module (BCM) Function NoItemDescription1Washer Linked Wiper - If the washer switch is pressed ON for 0.06~0.2 second with the vehicle mode in IGN2, the wiper relay is turned ON 0.3±0.1 second after washer switch ON, and then the wiper relay is turned OFF 0...
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection...