| Description |
This system is a supplementary function only. It is the
responsibility of the driver or always check the inside/ outside
rearview mirror and the area behind the vehicle before and while backing
up because there is a dead zone that can't see through the camera. |
Repair proceduresRemoval 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lide trim. (Refer to Body - "Trunk Lid Trim") 3. Disconnect the back view camera connector (A)...
Inspection • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Inspection flow Items to check 1. Inspect DTC code. 2. Inspect whether N setting matches...
Description Steering Wheel Angle Sensor detects rotating direction of the vehicle. Rotating direction detected by the sensor is communicated with HECU as CAN signal involving information about the angle through CAN communication line. HECU detects speed of the steering wheel handling and the angle with this CAN signal...