Hyundai Sonata LF: Body Side Molding / Delta Garnish Repair procedures
| • |
Put on gloves to prevent hand injuries. |
|
| • |
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. |
| • |
Take care not to scratch the body surface. |
|
| 1. |
Using a screwdriver or remover, remove the delta garnish (A). 
|
| 2. |
Install in the reverse order of removal.
| • |
Replace any damaged clips (or pin-type retainers). |
|
|
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage...
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage...
Other information:
Special Service Tools
Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09455-21200)Installation of the front oil sealValve stem oil seal installer(09222-2B100)Installation of the valve stem oil sealValve spring compressor and holderA : (09222-3K000)B : (09222-3K100)Removal and installation of the intake or exhaust valveCrankshaft rear oil seal installerA : (09231-H1100)B : (09231-2B200)Installation of the crankshaft rear oil sealRing gear stoppper(09231-2B100) (A)(09231-3N100) (B)Removal and installation of crankshaft pulley bolt...
C..
Roof Side Molding Repair procedures
Front Wheel Guard Repair procedures