| Circuit Diagram |

Crankshaft Position Sensor (CKPS) TroubleshootingWaveform This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these signals...
Crankshaft Position Sensor (CKPS) Repair proceduresInspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector (A). 3. Remove the fuel sender (A) after releasing the fix hook. Installation 1. Install in the reverse order of removal...
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 3. Remove the rear door belt outside weatherstrip (A). 4. After loosening the mounting screws, then remove the rear door delta garnish (A)...