Hyundai Sonata LF: Charging System / Battery Sensor Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Engine Electrical System / Charging System / Battery Sensor Repair procedures

Removal
1.
Disconnect the battery negative (-) cable.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery negative (-) cable after removing the bolts (B).

Installation
1.
Install in the reverse order of removal.

Battery sensor cable installation bolt:
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1 lb-ft)
Battery (-) terminal tightening nut:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

    Battery Sensor Description and Operation

    Description Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors...

    Starting System

    ..

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: In-car Sensor Repair procedures


    Diagnosis With GDS 1. The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS). ? The diagnostic system (GDS) provides the following information. (1) Self diagnosis: Checking the failure code (DTC) and display...

    Hyundai Sonata LF 2014-2019 Service Manual: Electric WGT Control Actuator Description and Operation


    Desrcription The Electric WGT Control Actuator is installed on the turbocharger.It operates the vain in the Waste Gate Turbocharger (WGT) and regulates the compressed air amount by the ECM's PWM signal. This actuator consists of a DC motor which actuates the vane, a 2-step gear which increases torque of the DC motor, a position sensor which detects status of the vane, an electric control unit which drives the DC motor...

    Categories

    read more

     
    Copyright В© 2026 www.hsonatalf.org