| Inspection with GDS |
| No | Procedure |
| 1 | Locate vehicle to flat plane |
| 2 | Tire check |
| 3 | IGN1 ON |
| 4 | Head lamp Low Beam ON |
| 5 | Connection with diagnostic tool |
| 6 | Initial command by diagnostic tool |
| 7 | Clear DTC Code |
| 8 | IGN1 OFF > ON |
| 9 | Re- Connection with diagnostic tool |
| 10 | Checking of HLLD output value as 15% and DTC Code |
| 11 | HLLD actuating by diagnostic tool command |
| 12 | Head lamp mechanical Initial Aiming |
|
| 1. |
Select the vehicle model and "Auto Head Lamp Leveling System (AHLS)"
|
| 2. |
GDS can operates actuator forcefully, input/output value monitoring and self diagnosis.
|
| 3. |
To perform functional test on AHLS outputs, select "Actuation Test".
|
| 4. |
Select " Parameter setting & Zero Position Initial".
|
| 5. |
Confirm that AHLS operate forcefully in "Head Lamp Leveling" menu.
|
| 6. |
To check the DTC of the head lamp leveling system, select "Diagnostic Trouble Codes" |
Auto Head Lamp Leveling Unit Repair proceduresInspection 1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. If the aim of the head lamps changes smoothly when the head lamp leveling switch is turned...
Description The Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary. The actuator is controlled according to the computed compensation value to obtain desired output...
C..