Hyundai Sonata LF: Charging System / Alternator Specifications

Hyundai Sonata LF 2014-2019 Service Manual / Engine Electrical System / Charging System / Alternator Specifications

Specification
Item
Specification
Rated voltage
13.5V, 130A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator built-in type
Regulator Setting Voltage
External mode
Refer to below graph
Internal mode
14.55 ± 0.3V
Temperature Gradient
External mode
0 ± 3 mV / °C?
Internal mode
-3.5 ± 2mV / °C

    Alternator Description and Operation

    Description The Alternator has eight built-in diodes, each rectifying AC current to DC current. Therefore, DC current appears at alternator "B" terminal...

    Alternator Components and Components Location

    Components 1. OAD (Overrunning Alternator Decoupler) 2. Front Bracket3. Front Bearing4. Stator5. Rotor6. Rear Bearing7. Rear Bracket8. Brush Holder Assembly9...

    Other information:

    Hyundai Sonata LF 2014-2019 Service Manual: Ambient Temperature Sensor Repair procedures


    Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature. 1. Ambient Sensor (+)2. Sensor ground Specification Ambient temperature[°C (°F)] Resistance between terminal 1 and 2 (k?)-40 (-40)881...

    Hyundai Sonata LF 2014-2019 Service Manual: Ambient Temperature Sensor (ATS) Description and Operation


    Description Ambient Temperature Sensor (ATS) is installed on the front-end module and senses the ambient temperature. ECM receives not only the intake air temperatue but also the ambient air temperature informations at the same time to control the intake air quantity precisely provided through the turbo charger...

    Categories

    read more

     
    Copyright © 2026 www.hsonatalf.org