SpecificationsSpecifications ItemsSpecificationHoodTypeRear hinged, gas lifter typeFront DoorConstructionFront hinged, full door constructionRegulator systemWire drum typeLocking systemPin-fork systemRear DoorConstructionFront hinged, full door constructionRegulator systemWire drum typeLocking systemPin-fork systemTrunk LidTypeFront hinged, power trunk lid type (option)Seat BeltsFront3 point type with Emergency Locking Retractor (E...
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control...
Inspection 1. Remove the left luggage side trim. (Refer to Body - "Trunk Trim") 2. Loosen the fuel filler actuator mounting bolts (2EA). 3. Remove the fuel filler door release actuator (B) after disconnecting the fuel filler door release actuator connector (A)...