Brake System..
SpecificationsSpecifications ItemSpecificationMaster cylinderTypeSingleI.D. mm(in)NON EPB ?22.22mmEPB?23.81mmPiston stroke mm(in)45±1mm(1.77±0.039in)Fluid level sensorProvidedBrake booster?Type11" SingleBoosting ratio9:01Front disc brakeTypeVentilated discDisc O...
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe. Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water...
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the floor console. (Refer to Body - "Floor Console Assembly") 4. Pull up the lock (C), of the SRSCM connector, then disconnect the connector (A and B)...