SpecificationsSpecification Ignition System Ignition Coil ItemSpecification Primary Coil Resistance (?)0.56 ± 10% [20°C (68°F)]Secondary Coil Resistance (k?)2...
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2. Check the condenser connections for leakage, and repair or replace it, if required...
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the engine cover. 3. Disconnect the ignition coil connector (A). 4. Remove the ignition coil (A). • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B)...