Hyundai Sonata LF: Starting System / Description and Operation
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of
the starter armature when the engine starts, the clutch pinion gear
overruns.
Other information:
Replacement
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negative (-) battery terminal.
3.
Recover the refrigerant with a recovery/charging station...
Components (1)
1. Dual clutch transmission assembly2. Clutch actuator3. Gear actuator4. Roll rod supprot bracket5. Engine room under cover6. Roll rod bracket7. Dust cover8. Support bracket mounting bolt9. Transmission support bracket
Components (2)
1...