Hyundai Sonata: Engine Control System / Boost Pressure Sensor (BPS) Description and Operation

Hyundai Sonata LF 2014-2019 Service Manual / Engine Control / Fuel System / Engine Control System / Boost Pressure Sensor (BPS) Description and Operation

Description
The Boost Pressure Sensor (BPS) is installed on the intercooler assembly and measures the pressure of the compressed air in turbocharger.

Ambient Temperature Sensor (ATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ATS connector. 3. Measure resistance between the ATS terminals 1 and 2 [B1/S1]. 4. Check that the resistance is within the ...

Boost Pressure Sensor (BPS) Specifications
Specification Pressure[kPa (kg/cm? / psi)]Resistance (k?)32.5 (0.33, 4.71)0.5284 (2.90, 41.19)4.5 ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Input shaft speed sensor 1 Specifications
Specification ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output signal (mA)High: 11.8 ~ 16.8Low: 5.9 ~ 8.4 ...

Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Rmove the blind spot detection (BSD) switch (A) after disengaging the mounting clip. Installation 1. Install the crash pad side switch assembly after conne ...

© 2018-2022 www.hsonatalf.org