Hyundai Sonata: Charging System / Battery Sensor Description and Operation

Description
Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to ECM. ECM controls generating voltage by duty cycle based on these signals.

Battery Troubleshooting
Troubleshooting ...

Battery Sensor Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation ...

Other information:

Hyundai Sonata LF 2014-2019 Owners Manual: Air bag inflation conditions
Front air bags Front air bags and the driver's knee air bag are designed to inflate in a frontal collision depending on the severity, speed, or angles of impact of the front collision. Side and curtain air bags Side and curtain air bags are designed to inflate when an impact is detected by side ...

Hyundai Sonata LF 2014-2019 Service Manual: Power Window Switch Description and Operation
Description System Diagram Driver Door Module (DDM) Driver Door Module (DDM) is part of CAN configuration, communicating with BCM, SMK, SJB, PSM, and ADM via CAN while performing wired signal I/Os with safety power windows. Operate the buttons of DDM located on the inner side of the ...

© 2018-2025 www.hsonatalf.org