| Description |
Side Impact Sensor (SIS) Repair proceduresRemoval Pressure Side Impact Sensor • Removal of the airbag must be performed according to the precautions/procedures described previously...
Inspection Transmission Control Module (TCM) Inspection Procedure 1. Inspecting TCM ground circuit: Measure the resistance between the TCM and chassis ground. (Check the terminal connected to the chassis ground while using the back of the harness connector as the base point for TCM...
Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly. (Refer to Body - “Floor console assembly") 3. Remove the EPB switch after loosening the screws. 4. Install in the reverse order of removal...