Hyundai Sonata: Specifications, Consumer information and Reporting safety defects / Recommended Lubricants and Capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

Recommended SAE viscosity number

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

Volume and Weight & Air Conditioning System
Volume and Weight Air Conditioning System ...

Vehicle Identification Number (VIN) & Vehicle Certification Label
Vehicle Identification Number (VIN) The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. The number is punche ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Alternator Components and Components Location
Components 1. OAD (Overrunning Alternator Decoupler) 2. Front Bracket3. Front Bearing4. Stator5. Rotor6. Rear Bearing7. Rear Bracket8. Brush Holder Assembly9. Through Bolt10. Rectifier Assembly11. Rear Cover ...

Hyundai Sonata LF 2014-2019 Service Manual: Hood Assembly Repair procedures
Replacement     • Be careful not to damage the hood and body.     • When removing and installing the hood, an assistant is necessary. 1. After loosening the hood hinge (A) mounting bolts, remove the hood assembly (B). Tightening torque : ...

© 2018-2024 www.hsonatalf.org