| Replacement |
| 1. |
Remove the hole plug (B). |
| 2. |
After loosening the mounting bolt, then remove the rear door outside handle cover (A).
|
| 3. |
Remove the rear door outside handle (A) by sliding it rearward.
|
| 4. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Repair proceduresReplacememt 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A)...
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between the HO2S terminals 3 and 4 [B1/S2]. 5. Check that the resistance is within the specification...
Description The fuel pressure sensor (FPS) is installed on the top of the low pressure fuel pump and measures the pressure in the low pressure fuel line. Based on the fuel pressure measured by the FPS and the amount of fuel consumed, the fuel pump control module (FPCM) determines whether to activate the low pressure fuel pump...