Hyundai Sonata LF: Blower / Intake Actuator Description and Operation
Hyundai Sonata LF 2014-2019 Service Manual / Heating, Ventilation and Air Conditioning / Blower / Intake Actuator Description and Operation
| Description |
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculation and fresh
air modes.
Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Shift Lever Components and Components Location
C..
Hyundai Sonata LF 2014-2019 Service Manual: Refrigerant Line Repair procedures
Replacement 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative (-) battery terminal. 3. Recover the refrigerant with a recovery/charging station...
Categories
- Manuals Home
- Hyundai Sonata Owners Manual
- Hyundai Sonata Service Manual
- Engine Control / Fuel System
- General Information
- Heating, Ventilation and Air Conditioning
- New on site
- Most important about car
Copyright В© 2026 www.hsonatalf.org