| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Using a screwdriver or remover, remove the center fascia panel (A).
|
| 3. |
Disconnect the A/C & heater controller connectors (A).
|
| 4. |
Remove the heater and A/C controller (A) from the center facia panel.
|
| 5. |
Install in the reverse order of removal.
|
Description Passenger Airbag (PAB) module is located in the passenger crash pad. This PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending of crash speed or the tightening of seat belt, it is decided a timing about both 2 firing squibs of airbag and 1 firing squib of active vent...
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the glove box housing. (Refer to Body - "Glove Box Upper Cover Assembly") 3. Disconnect the passenger airbag connector (A) and remove the PAB mounting bolts (B)...