| Components |

Front Impact Sensor (FIS) Description and OperationDescription The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location...
Front Impact Sensor (FIS) Repair proceduresRemoval • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s)...
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay block. Power Relay (Type A) Check for continuity between the terminals. 1) Start relay 2) Deicer relay 3) Head lamp (high) relay 4) Blower relay 5) Power outlet relay 6) E-CVVT relay 1...
Outside Rear View Mirror Components and Components Location Component Location 1. Outside rear view mirror Outside Rear View Mirror Repair procedures Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage...