| Replacement |
| 1. |
Remove the hole plug (B). |
| 2. |
After loosening the mounting bolt, then remove the front door lock (A).
|
| 3. |
Remove the front door outside handle (A) by sliding it rearward.
|
| 4. |
Disconnect the front door outside handle connector (A).
|
| 5. |
Install in the reverse order of removal.
|
Front Door Belt Outside Weatherstrip Repair proceduresReplacement 1. Pull down front door window glass by pressing the power window glass switch. 2. Remove the front door belt outside weatherstrip (A)...
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable...
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return...