Hyundai Sonata: Front Seat Belt / Height Adjust Repair procedures

Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Retractor")
2.
After loosening the mounting bolts, then remove the height adjust (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Input shaft speed sensor 2 Components and Components Location
Components 1. Input shaft speed sensor 1 (Odd)2. Input shaft speed sensor 2 (Even) ...

Hyundai Sonata LF 2014-2019 Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) af ...

© 2018-2023 www.hsonatalf.org