Hyundai Sonata: Braking System / Good Braking Practices

WARNING

Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, then apply the parking brake, and place the ignition switch in the OFF position.

Vehicles with the parking brake not fully engaged are at risk for moving inadvertently and causing injury to yourself or others.

Wet brakes can be dangerous! The brakes may get wet if the vehicle is driven through standing water or if it is washed. Your vehicle will not stop as quickly if the brakes are wet. Wet brakes may cause the vehicle to pull to one side.

To dry the brakes, apply the brakes lightly until the braking action returns to normal, taking care to keep the vehicle under control at all times. If the braking action does not return to normal, stop as soon as it is safe to do so and call an authorized HYUNDAI dealer for assistance.

DO NOT drive with your foot resting on the brake pedal. Even light, but constant pedal pressure can result in the brakes overheating, brake wear, and possibly even brake failure.

If a tire goes flat while you are driving, apply the brakes gently and keep the vehicle pointed straight ahead while you slow down. When you are moving slowly enough for it to be safe to do so, pull off the road and stop in a safe location.

Keep your foot firmly on the brake pedal when the vehicle is stopped to prevent the vehicle from rolling forward.

Hill-Start Assist Control (HAC)
The Hill-Start Assist Control (HAC) helps prevent the vehicle from rolling backwards when starting a vehicle from a stop on a hill. The system operates the brakes automatically for approximately 2 s ...

Drive Mode Integrated Control System
The drive mode may be selected according to the driver's preference or road condition. The mode changes whenever the DRIVE MODE button is pressed. • COMFORT mode : COMFORT mode provides smooth and ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Input shaft speed sensor 2 Components and Components Location
Components 1. Input shaft speed sensor 1 (Odd)2. Input shaft speed sensor 2 (Even) ...

Hyundai Sonata LF 2014-2019 Service Manual: Exhaust Manifold Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Remove the air cleaner assembly. (Intake And Exhaust System - "Air Cleaner") 4. Remove the front muffler. (Intake And Exhaust System - "Muffler") 5. Remove the intercooler inlet ...

© 2018-2024 www.hsonatalf.org