Hyundai Sonata: Exterior Care / Finish damage repair
Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense.
NOTICE
If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anti-corrosion materials to the parts repaired or replaced.
Finish maintenance
Washing
To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly
and frequently at least once a month with lukewarm or cold water.
If you use your vehicle for off-road ...
Bright-metal maintenance
To remove road tar and insects, use a tar remover, not a scraper or other
sharp object.
To protect the surfaces of brightmetal parts from corrosion, apply a coating
of wax or chrome preservativ ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Front Driveshaft Components and Components Location
Components
[THETA 2.4 GDI]
1. Driveshaft (LH)2. Driveshaft (RH)3. Heat protect
[THETA 2.0 T-GDI / GAMMA1.6 T-GDI]
1. Driveshaft (LH)2. Driveshaft (RH)3. Inner shaft bearing bracket assembly
...
Hyundai Sonata LF 2014-2019 Service Manual: Wheel Repair procedures
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
When using an impact gun, final tightening torque should be checked using a torque wrench.
Run out inspection
1.
Jack up the vehicl ...
