Hyundai Sonata: General Information / Description and Operation

Description
Emissions Control System consists of three major systems.
Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.
General Information
...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) ? Specification ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ? Type: Piezo-Resistive ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Special Service Tools
Special Service Tools Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09455-21200)Installation of the front oil sealValve stem oil seal installer(09222-2B100)Installation of the valve stem oil sealValve spring compressor and holderA : (09222-3K000)B : (09222-3K100)Remov ...

Hyundai Sonata LF 2014-2019 Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And Exhaust System” in EM group). 3. Disconnect the injector connector (A). 4. Remove the installation bolt (B), and then remove the sensor from ...

© 2018-2025 www.hsonatalf.org