Hyundai Sonata: Fuel economy / Driving Info display

This display shows the trip distance (1), the average fuel economy (2), and the total driving time (3).

The information is calculated for each ignition cycle. The driving information data gets initialized, when it has passed 4 hours after turning OFF the engine. In other words, the last driving information is available 4 hours after you have turned on the engine.

To manually reset the information, press and hold the OK button when viewing the Driving info. The trip distance, the average fuel economy,

and total driving time will reset simultaneously. The driving information will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light.)

Information

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated.

Accumulated Info display
This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is calculated starting from the last reset. To manually reset the ...

Digital Speedometer
This message shows the speed of the vehicle (MPH). ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Timing Chain Repair procedures
Removal 1. Turn the crankshaft pulley clockwise, and align its groove with the timing mark of the timing chain cover. 2. Remove the timing chain cover. (Refer to Timing System - "Timing Chain Cover") 3. Align the timing marks of the CVVT sprockets with the upper surface of the cylinde ...

Hyundai Sonata LF 2014-2019 Owners Manual: In Case of an Emergency While Driving
If the Engine Stalls While Driving Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. Turn on your hazard warning flasher. Try to start the engine again. If your vehicle will not start, contact an authorized HYUNDAI dealer or seek other qualif ...

© 2018-2022 www.hsonatalf.org