| Description |
Schematic DiagramsSchematic Diagram Canister The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set...
Replacement 1. Disconnect the negative (-) battery cable. 2. Remove the glove box. (Refer to Body - "Crash Pad") 3. Remove faulty part and fit bracket assembly to new part. 4. Secure new part to vehicle and fit connector. 5. Re-connect battery and turn Ignition on...
Inspection 1. Fuse inspection Mount the test fuse to the switch fuse and relay fuse part to confirm a normal joint fit. 2. Inspection of connector by each part Check to see whether or not each connector has been damaged, or terminal surge, or incomplete connection has taken place [Engine room junction box] [Stop signal electronic module] [ABS/VDC control module] 3...